Phantom 2 vision and Vision+ have been upgraded.
Call it Revision 2.
Transmitter
The transmitter is equipped with a built-in rechargeable LiPo battery with a capacity of 2000 mAh. At the front a LED indicators show the battery level. The micro-USB connector to charge the transmitter is on the bottom. During charging, the LED indicators light red and green when the transmitter is fully charged.
Gimbal Control
on the side of the transmitter is a turn knob that allows you to control the gimbal. It allows you to control the angle of the camera so you can create better shots.
Trainer port
at the rear of the transmitter has a trainer port added. This trainer port allows you to set the transmitter to a computer to connect to control a simulation drone. It is possible to gain virtual flight experience so you start late if not fast crash your expensive drone.
Throttle lock
By the throttle (left stick on the transmitter) down do click it. The drone begins gradually with decreasing height. The throttle lock will be when you push the lever lifted upwards.
Motors
The motors of the DJI Phantom 2 series have also improved. The housing is greatly improved and better able to withstand rough handling. Now The engine has more power and better heat dissipation without the engine has increased in weight. The engine delivers almost 25% more power so the drone can also be heavily loaded without affecting the flight. Several components to the drone can be added. The propellers are also modified and improved efficiency by making the propellers consume less energy and provide a better flying experience.
Compass
Compass of the DJI is adjusted. This compass is equipped with a new look and a protective cap. The compass is also antistatic.
Conclusion
DJI well to perform from these upgrades. The performance is improved and the flight time is thus unchanged. Using your transmitter in a simulation on the computer and operate the gimbal with the transmitters we see as significant improvements.